DescriptionThe RCF 2 Rolling Bearing Tribometer is designed for running friction loss tests on
WhatsApp : +86 13816217984
Email : info@qinsun-lab.com
The RCF 2 Rolling Bearing Tribometer is designed for running friction loss tests on rolling element bearings, including large and heavy axial load taper roller bearings. Two alternative test assemblies are available, one for testing smaller bearings at loads up to 10 kN and one for testing large bearings at loads up to 40 kN. The maximum speed is 7.500 rpm.
| Contact Configurations: | Taper Roller Bearing | |
| Angular Contact Bearing | ||
| Thrust Ball Bearing | ||
| Roller Thrust Bearing | ||
| Rotational Speed: | 100 to 7.500 rpm | |
| Motor: | 4.0 kW ac @ 1.500 rpm | |
| 50% overload available for 30 seconds | ||
| Heated Block Power: | 550 W | |
| Temperature Sensor: | k-type thermocouple | |
| Vibration Sensor: | piezo-electric type with adjustable threshold sensitivity and cut-off time | |
| Interface: | Serial Link Interface Module | |
| Software: | COMPEND 2000 | |
Controlled Parameters | ||
| Rotational Speed | ||
| Temperature | ||
| Carga | ||
| Duración de la prueba | ||
Recorded Parameters | ||
| Rotational Speed | ||
| Friction Torque | ||
| Temperatures | ||
| Number of Revolutions | ||
| Duración de la prueba | ||
| Vibration Sensor Output | ||
RCF 2/10 Low Load Range Test Assembly | ||
| Friction Torque: | 10 Nm In-line Torque Transducer | |
| Load Reaction: | Spindle Bearings | |
| Spindle Bearing Load: | 10.000 N @ 3.000 rpm | |
| 4.000 N @ 7.500 rpm | ||
| Maximum Test Bearing O/D: | 60 mm | |
| Maximum Temperature: | 150°C | |
RCF 2/40 High Load Range Test Assembly | ||
| Friction Torque: | Torque Arm and Load Cell | |
| Load Reaction: | Bearing Housing | |
| Spindle Bearing Load: | 40.000 N | |
| Maximum Test Bearing O/D: | 180 mm | |
| Maximum Temperature: | 150°C | |
Services | ||
| Electricity: | 380/415 V, three phase, | |
| 50/60 Hz, with neutral & earth 7.5 kW | ||
| Clean, dry air: | 4 cfm at 8 bar (120 psi) | |
Installation | ||
| Floor-standing Machine: | 900 x 600 x 2000 mm high, 250 kg | |
| Bench-mounting cabinet: | 530 x 420 x 300 mm high, 20 kg | |
| Packing Specifications: | 2.2 m3, GW 600 kg, NW 450 kg | |
Descargo de responsabilidad: El contenido anterior es para referencia y comunicación solo entre expertos de la industria, y no garantiza su exactitud o integridad. De acuerdo con las leyes y reglamentos relevantes y los reglamentos de este sitio web, las unidades o individuos que compren artículos relacionados deben obtener cualificaciones y condiciones de cualificación válidas.
Teléfono de la empresa
+86-21-6420 0566
Horas de trabajo
De lunes a viernes
Teléfono móvil:
13816217984
Correo electrónico:
info@qinsun-lab.com
