The Air Tightness Tester is mainly used for air tightness testing of masks and respirators under spe
Correo electrónico: info@standard-groups.com
The Air Tightness Tester is mainly used for air tightness testing of masks and respirators under specified conditions. Applicable to masks, respirators and breathing valve manufacturers, quality supervision, scientific research, wearing and other units.
Criterios:
GB 2626-2019
FEATURES
1. The test time can be set. When the set time is up, an automatic alarm prompts.
2. Equipped with a standard test head mold, the standard configuration is a medium head mold. If you need a small or large size, you can purchase it separately. The breathing valve is equipped with a special clamp.
3. Real-time display of the test breathing gas volume.
4. The flow sensor is a digital flow meter with high sensitivity. The chip uses a thermal mass flow meter without temperature and pressure compensation.
5. PLC touch screen control, related operations can be completed through the touch screen.
Parámetros técnicos
Pumping rate | 0-10L / min ~ 100L / min, adjustable, standard 2 L / min. |
Air source | professional-grade vacuum pump |
Micro Manometer range | 0~2kPa, accuracy 1%, resolution 1Pa. |
Timing range | 0-99.99, accuracy is 1%, resolution is 0.1S. |
Fuente de alimentación | AC220V, 50Hz |
Descargo de responsabilidad: El contenido anterior es para referencia y comunicación solo entre expertos de la industria, y no garantiza su exactitud o integridad. De acuerdo con las leyes y reglamentos relevantes y los reglamentos de este sitio web, las unidades o individuos que compren artículos relacionados deben obtener cualificaciones y condiciones de cualificación válidas.
Teléfono de la empresa
+86-21-6420 0566
Horas de trabajo
De lunes a viernes
Teléfono móvil:
13816217984
Correo electrónico:
info@qinsun-lab.com
