Burning heat value tester for building materials

ámbito de aplicación:

It is suitable for measuring the calorific value of solid and wavy combustible materials such as anthracite, bituminous coal, lignite, heavy oil, building materials and biomass fuel.

Cumplir con los estándares:

GB/T213-2008 "Coal calorific value determination method"

ASTM D5865-13 - Determination of Calorific Value of Coal and Coke

GB/T384-1981 "Determination of calorific value of Petroleum products"

GB/T30727-2014 "Determination of calorific value of solid biomass fuel"

ISO 1928:2009 Determination of calorific value of solid fossil Fuels

Technical features:

1. The test process is controlled by the computer, automatic water injection, no need to adjust the water temperature, just put the aerobic bomb into the barrel, the instrument can automatically complete the test.

2. Automatically calculate statistical data such as average value and standard deviation.

3. Can be connected to the electronic balance and printer, automatically read the sample weight, simple operation, friendly interface, good fault tolerance.

4. Strong data processing ability, historical data can be checked, can be printed, with data upload function, can realize real-time data sharing.

Parámetros técnicos:

Heat capacity: about 10500J/K

Thermal capacity stability {<}0.15%

Resolution :0.0001° C

Oxygen bomb pressure :20MPa

Inner cylinder capacity :2.3L

Outer cylinder capacity :35L

Repeatability: Repeatability relative standard deviation ≤0.1%

Test time: About 15 minutes

Ignition voltage :24V